DESTROKED: Cummins Conversions

You are not limited to a manual transmission, or any transmisssion for that matter.
We build what you need to put just about any transmission cummins motor combination in your truck.

UNLESS OTHERWISE NOTED, ALL PARTS ARE CURRENTLY AVAILABLE !

Parts are available directly thru DeStroked but we recommend contacting a Dealer.


Cummins to 4R100/E40D** Available for 12v/ 24v or Commonrai l(shown) motors. Commonrail plates have the o-ring groove to seal the rear camshaft. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. When used with the billet hybrid flexplate, use the Ford torque converter of your choice. $795	Cummins to 5R110 (Torqueshift)** Available for 12v/24v (shown) or Commonrail motors. This is the plate for your 6.0 conversion. Commonrail plates have the o-ring groove to seal the rear camshaft. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. When used with the billet hybrid flexplate, you must use a flat face torque converter. $795	Cummins to Diesel ZF5** Available for 12v/24v (shown) or Commonrail motors. Commonrail plates have the o-ring groove to seal the rear camshaft. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. Also includes crankshaft pilot bushing. $795

Cummins to Gas ZF5**
Available for 12v/24v (shown), or Commonrailmotors. Commonrail plates have the o-ring groove to seal the rear camshaft. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. Also includes crankshaft pilot bushing
$795

Cummins to ZF6
Available for 12v/24v (shown) and Commonrailmotors. Commonrail plates have the o-ring groove to seal the rear camshaft. Includes transmission mounting bolts and starter mount bolts. Requires use of our crankshaft spacer
$795

4BT to Muncie 4spd**
This plate will adapt your cummins motor to any GM . Must be used with our billet flywheel. Available for 12v/24v (shown), or Commonrail motors. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. Cummins does not reccomend using this transmission behind a 6 cylinder.

$795


Cummins to Allison** This plate will adapt your cummins motor to an allison 1000 series transmission with a GM bellhousing. Must be used with our hybrid billet flexplate. Available for 12v/24v (shown), or Commonrail motors. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. $795	4bt/6bt to GM** This plate will adapt your cummins motor to any GM Automatic. Must be used with our hybrid billet flexplate. Available for 12v/24v (shown), or Commonrail motors. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. $795	Cummins to Ford Small Block 4 spd** This plate will adapt your cummins motor to a Ford small block 4 speed. Must be used with our billet flywheel. Available for commonrail (shown), or 12v/24v motors. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. $795


Cummins to 6.0 Ford ZF6** Available for Commonrail (shown) and 12v/24vmotors. Commonrail plates have the o-ring groove to seal the rear camshaft. Includes transmission mounting bolts and starter mount bolts. Requires use of our crankshaft spacer $795	Cummins to 4R100 Gas ** This would be the plate for a V10 replacement. Available for 12v/ 24v or Commonrai (shown) motors. Commonrail plates have the o-ring groove to seal the rear camshaft. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. When used with the billet hybrid flexplate, use the Ford torque converter of your choice. $795	7.3 Powerstroke to Allison**This plate will adapt your 7.3 Powerstroke motor to an allison 1000 series transmission with a GM bellhousing. Must be used with our hybrid billet flexplate. Available for 12v/24v (shown), or Commonrail motors. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts $795


Cummins to Ford Modular** This plate will adapt your cummins motor to a Ford modular bellhousing automatic. Must be used with our hybrid billet flexplate. Available for commonrail (shown), or 12v/24vl motors. There is no need to clearance your transmission with this adapter plate. Includes transmission mounting bolts and starter mount bolts. $795	Crank Spacer This is needed for all ZF6 plates $120	Pilot Bushing Oillite bronze. Included with ZF5 Adapter Plate. $ 18
** Unlike other adapter plates, the DeStroked unit DOES NOT require you to relieve your transmission and thus voiding any warranty or future service. Click Here to see what NOT to do!


Cummins to 4R100 Billet Hybrid. These flexplates exceed SFI specs. No shims or spacers needed. Made specifically for each application. $625	Cummins to GM / Allison Billet Hybrid. These flexplates exceed SFI specs.No shims or spacers needed. Made specifically for each application. $625	Cummins to 5R110 Billet Hybrid. These flexplates exceed SFI specs.No shims or spacers needed. Made specifically for each application. MUST USE A FLAT FACE CONVERTER $625


Motor Mount Strong and reliable bolt in mounts for commonrail superduty conversions! $295	Motor Mount 99-06 Superduty WITH THE POLY INSULATORS. Contact Auto World directly for this part. $655, Singles $430	Motor Mount 88-00 GM for 97-2002 Cummins Hi Torque, Hi Horsepower Applications WITH THE POLY INSULATORS. Contact Auto World directly for this part $375 singles $575 Doubles.


Throttle Cable Kit '03-'04.5 Commonrail $99

COMING SOON!


Gen 3 Valve Cover One piece billet aluminum. Custom engraved to your specifications. This is a sample we did for a Gen3 motor at ATS. $399	Gen 2 Valve Cover Coming Soon .	Gen 1 Valve Cover Coming Soon .

Picture Soon!!

Programmable Electronic Automatic Transmission Controller
Ford E40D, 4R100, 5R110. Gm 4L80E
Click here for brochure.
$ 850 Harness Included

Allison Stand alone controller 5speed

Includes Allison TCM, XFC, TPS adapter and complete harness. Allows user definable shift points,converter lockups,and shift quality. Also has tunable torque input, TPS calibration,and engine RPM calibration. Tow haul mode and overdrive cancel.

$ 1599

*There is a $100 core charge for the Allison TCM

Allison Stand alone controller 6speed

Includes Allison TCM, XFC, and complete harness. Allows user definable shift points,converter lockups,and shift quality. Also has tunable torque input, TPS calibration,and engine RPM calibration.Tow haul mode and overdrive cancel.

Available Soon!

*There is a $100 core charge for the Allison TCM

	Picture Soon!!	Picture Soon!!
Commonrail Tach Kit This eliminates the need for a second tach pickup and or tone wheel on the commonrail motors. Takes the input from the stock Cummins crank sensor and converts it to 4, 12, or 58 pulses which is what your Ford tach is looking for. $$ Price Soon!

To aid with your conversion, I have teamed up with John at Northglenn Dodge. He has a list of all DODGE parts needed to do the Superduty Conversion. Destroked customers can order DODGE PARTS direct from them, get Destroked's discount, and have the parts shipped direct to you the customer. This is only for DODGE PARTS BELOW and does NOT include the parts shown above. To order the parts on this page, please contact one of the dealers on our Dealers Page. This is a parts list for items you might need for a 2003- early 2004 Cummins commonrail. If you need any Dodge parts: Contact John directly via phone 303-457-4811 or email ngdparts@idcomm.com.
Dodge Part #	Description	Dodge Part #	Description
53032649-aa	Mass Air Flow Sensor	52113925-al	Power Steering Pump
55056985-aa	Inner Fan Shroud	52028977-aa	Charge Air Duct Clamp
52028872-ad	Radiator Hose	55056561-aa	Charge Air Duct Clamp
52028873-ac	Radiator Hose	52028878-ab	Fan
55056560-ab	Charge Air To Turbo Hose	55056990-ab	Fan Clutch
55056561-aa	Charge Air Duct Clamp	56028732-aa	Alternator
55056980-aa	Fan Shroud Outer	R5055339-ah	AC Compressor
5139068-aa	Fan Shroud Bracket	52021136-aa	Motor Mount (QTY 2)
5139069-aa	Fan Shroud Bracket	52122714-ab	Rubber Mount (QTY 2)
5139067-aa	Fan Shroud Bracket

Image Cummins Rocky Mountain To aid with your conversion, I have also teamed up with Chris at Cummins Rocky Mountain. He has experience in Cumminsconversions and can find the Cummins parts you are looking for. Destroked customers can order CUMMINS PARTS direct from him, get Destroked's discount, and have the parts shipped direct to you the customer. This is only for CUMMINS PARTS and does NOT include the parts shown above. To order the parts on this page made by Destroked, please contact us or one of the dealers on our Dealers Page.

Contact Chris directly via phone 303-927-2243 or email george.c.weakley@cummins.com.

Leave him a message and he will get back to you. He is extremely busy.